Grout Pumps / Grout Pumps with Continuous Mixer

Grout Pump with Mixer

We designed and manufactured this model with a built in continuous mixer in 2001 for the first time. We attached a continuous mixer to screw pump to avoid the problems experienced with Mai Pump type mixer pumps. We focused on increasing the efficiency of the mixing process to reduce the high consumption of spare parts because of the poorly mixed grout mixtures. We managed to make homogenous mixtures within the continuous mixture and surpassed all the problems. We increased the work efficiency. We kept improving our product in the following years. It became the most populare model for bolt grouting. Its user friendly and practical design ended the days of mixer pumps for grouting. It became the most satisfactory model which is subjected to the struggles of other manufacturers to try copying and manufacturing.

The continuous mixer which is independent from the pump can make homogenous mixture. The mixers we produce also have a special interior design. The most qualified homogenous mixture is made when our mixer prevents forming lump. At the construction of the 3rd bridge between Europe and Asia in Istanbul, the grouting for the post tensioning which required very sensitive rates of mixtures was made with our machine. The mixture made with our mixer was analysed and the work was completed with the anaylises reports approved everyday. It is possible to make mixture homogenous that much with high sensivity. As it does not form lumb, it avoids delivering dry materials into the pump. The pump and hose never gets choked up because of lump. The work never stops. The life time of the rotor stator is saved. The flawless and economical work increases the efficiency. It leads to more satisfactory results. It is a unique design of grout pump with no equivalent even if there are similars. The most valuable result for us is our happy clients.

The materials and water are put in the mixer and get mixed. The homogenously mixed mixture is made. When the mixture is ready the pump is started and grouting is made to the bolt. Our unique models are available for use in both bolt grouting and contact and consolidation grouting. All of our models are ideal for applying any grout material; cement, gypsum, lime, refractory materials, geothermal grout, and bentonite with low wearing rate. Some of our models are fine with the materials with high wearing rate. You may check our piston grout pump models if you need more improved models with higher delivery rates up to 15 m3 per hour - 250 lt per minute. You may check our grouting mixer pump models for use in small size projects.

The cleaning and maintenance of each model is very easy and practical. Each model is design with only one greasing point for easy maintenance. The user who is not required to maintain the machine very often is happy. The managers are also happy with the machine which does not cause any problem because of the missing maintenance. Beside the components of the pump are easy to dismount. This is another important of easiness for faster cleaning. If greased before and cleaned after each used properly, it can work without any malfunction and consumption of spare parts (except the rotor stator). These advantages are the key points about our machines. Easy cleaning, less maintenance, longer life time of spare parts.

Our products are designed and manufactured due to European and world standards. They conform to the requirements of work safety. The electrical board which conforms to work safety requirements is design and manufactured with the most qualified components without avoiding the necessary expenses.

 Model GP-35 GP-45 GP-55
 Ac power 380 V, 50 Hz
 Pomp motor 5.5 kW 7.5 kW 7.5 kW
 Mixer motor 2.2 kW, 55 rpm
 Grout delivery rate 35 lt/min 55 lt/min 80 lt/min
 Delivery distance (hor.) 50 m 100 m 100 m
 Rotor stator type No.8 No.6+++ No.12
 Grain size support 0 - 3 mm 0 - 6 mm 0 - 10 mm
 Max. working pressure 30 bar 30 bar 30 bar
 Mixer hopper volume 260 lt 500 lt 500 lt
 Filling height 1200 mm 1500 mm 1300 mm
 Dimensions ( W x L x H ) 1000 x 2000 x 1900 mm
 Weight 480 kg  520 kg 530 kg
 
Product Catalog | Video

 

"14.Year in the Production"

Building, Tunel and Mine Construction Machines

"Our job is to produce. We love to produce."

 

 

googleplusyoutubefacebooktwitter

What are you searching ?

Use the search bar to find everything :

PASHA Makine Ltd. Şti. is a HETCO Group Company.

Home Page | Privacy Statement | Terms of Use | Privacy Policy

© 2005-2018 - PASHA Makine Ltd. Şti. All rights reserved.